описание ошибок
1997 Chevy Truck S10/T10 Blazer 4WD V6-4.3L VIN W Copyright © 2011, ALLDATA 10.50PE Page 1
Computers and Control Systems: Diagnostic Trouble Code Descriptions
Transfer Case
DIAGNOSTIC TROUBLE CODE (DTC) 1
When the ignition switch is positioned to "RUN", the TCCM test to determine if RAM Standby Power (maintained battery power) to the TCCM
was lost since the ignition was last turned off. When power is interrupted on pin C6 of the TCCM, the TCCM stores a "loss of RAM Standby
Power" DTC 1.
DIAGNOSTIC TROUBLE CODE (DTC) 2
During electronic shifting, the TCCM check the motor/encoder for normal operation. If the motor/encoder does not function correctly enough
times, the TCCM stores a "motor/encoder failure" DTC 2.
DIAGNOSTIC TROUBLE CODE (DTC) 3
The TCCM performs a test each time the electric-shift motor is turned on or off. If the motor does not functioning properly the TCCM stores a
"motor circuit failure" DTC 3, and the shift select buttons blink to inform the driver of a problem.
DIAGNOSTIC TROUBLE CODE (DTC) 4
Each time the ignition is turned on, the TCCM test it's memory, program, and internal system to ensures that it is operating properly. If the TCCM
detects a fault within it's self, the TCCM stores a "RAM/ROM memory failure" (DTC) 4.
- When the TCCM is running a diagnostic and a code 4 is displayed by the shift select buttons, replace the TCCM.